工字钢电缆小车 M-Line 0330系列

工字钢拖令系统

M系列圆形/扁形电缆滑车（速度最快、结构最强型号），采用热浸镀锌钢材质制造，配备四点悬挂系统，适用于中等速度及高载荷工况。

主要应用

桥式起重机
输送系统
电动葫芦
运输系统

规范

最大行进速度 ^1）： 150 米/分钟 [492.1 英尺/分钟]
滑车最大载重量 ^1）：200 kg [440.9 lb]
主滚轮直径： 63 mm [2.48“]
环境温度：-30° ... +80° C [-22° F 至 176° F]
应用：室内/室外
工字钢：平行法兰/锥形法兰

^1）取决于滚轮尺寸/滚轮材料

下载

Festoon Systems for I-Beams Program 0314 | 0320 | 0325 | 0330

PDF | 1.63 MB

语言: 英语

文档类型: 宣传册

Download

MAL0300-0002-EN Festoon Systems for I-Beams - 0320, 0325, 0330

PDF | 1.7 MB

语言: 英语

文档类型: 作业手册

Download

常见问题

When is the Cable Trolley M-Line Series 0330 used?

The I-Beam Festoon System M-Line Series 0330 is for medium and large flat or round cable packages. Mainly used on standard overhead cranes, to supply energy for hoists and similar applications, and whenever a modular and robust system is required.

How does an I-Beam system work?

Cable trolleys are installed on an I-beam. The cable package is installed on the cable trolleys in cable loops. The system is moved by a towing trolley, which is fixed to the energy consuming equipment.

How is the energy and data transmitted?

Energy and data are transmitted via flexible flat or round cable packages. Any cable used must be suitable for use in a festoon system. Various types of cable with PVC, PUR or rubber insulation are available.

What is the typical track profile?

The system is typically operating on tapered or parallel I-beams. Usually standardised I-beam sizes are used.

Are I-Beam Festoon Systems for indoor or outdoor use?

I-Beam Festoon Systems can be used both indoors and outdoors.

What are the typical wear parts?

Typical wear parts are the rollers of the running gears and the buffers on the trolleys. The rubber damping devices used in a system are also subject to wear.